How to wire up BULGIN PLUGS AND SOCKETS
BULGIN PLUGS are the standard Connector for DJ lighting screens and light boxes. There is a new Generation 4 of the BULGIN PLUG.
Panel Mount Female Circular Connector with 8 poles Max. Rating 6A, 250Vac (per pin) pole-pole 5.2kV max. How to wire up Bulgin plugs. A big problem is there are a number of different wiring configurations adopted by various light controller manufacturers. The one I use is the NJD Lighting of Nottingham wiring standard.
This is a pretty standard wiring (1) the earth or ground (2-3-4-5) the four switching lives (6-7-8) the neutral or the common. If you bye a off the shelf disco light screen check how it is wired up before you plug in the controlling switching unit. It’s nice to put a flying lead on each of your disco boxers with 2 plugs on each box so you can easily and quickly setup your light show and will give a better versatility of display configurations adapting to the venues requiems. Some times there’s no room to swing a cat, and every DJ must no exactly what in mean.