Music louder sound.

How to Improve the total output of a your louder sound system. the outputs level of the sound system is measured in the DB to make something twice as loud the increase in level of sound will be +3 dB.

(1) The first method of increasing the level of a louder sound is the design of the speaker box enclosure, it should be a acoustic fold exponential horn or sub horn hyperbolic horn for better bass roll-off and solid designed .How this works is similar to playing a game of billiards as you hit one ball and that in turn hits two balls and so on, this is how the air molecules behave inside the exponential horn and that’s what gives the three decibels of gain in the speaker and closure.

(2) The next method for music louder sound is the incorporation of IE 3 way active crossover unit this makes the sound split up into its three individual frequencies so the electronic crossover feeding the base amplifier is not amplifying the top end treble and vice versa for the other amps. There's no point in sending a frequency to IE to a speaker driver that it is incapable of reproducing, the signal just gets lost and wasted. This is saving power; the effect of this is really making each one of your dedicated dj amplifiers three times more effective.

(3) The method number three to gain music louder sound is the incorporation of a multi effects zoom, DBX or ALESIS 3630 compressor gate and noise limiter.When music is being played there is about twelve decibels of bounds gain, the behringer compressor turns down the gain by about -6 dB. There is a setting that you can turn it down to three dB but this will make your music sound very flat and unresponsive by having too much compressor audio work in place. Because you have turned your sound levels down and flattened out some of the big peeks you can then turn your sound master up by +6 dB to take you back to your regional position or in reality would have gained +6 dB in actual fact.

(4) Music loudest sound last method is to use exciter expander; a good example is a 482i sonic maximizer by the BBE Company. This adds an extra life and vitality to the sound of music making the hill come alive.

If you incorporate all four of these methods you will attain a figure of around of twelve decibels (+12 dB) of gain which is four times as louder as your original sound system than what would be by using conventional speakers with passive crossover design and amplifiers.
I have been designing and building speaker sound systems for around twenty years now trying out different acoustic design enclosures and drivers. But my own personal sound system is a mixture from different companies and manufacturers, some of the manufacturers produce really good base product and some of the manufacturers make high-quality midrange and so on. You can't just use one particular brand of speakers (Turbo sound, Carlsbro, Fane, JBL, Peavey, Richard Alan) to attain a perfect flat response across the frequency range.
The ohm amplifiers I am using are a mixture as well but not a complete mixture, I am trying to use cs 250 cloud of Sheffield, hpr qsc mx QSC audio 3402, amplifier""yamaha and amplifier c-audio ra 3001,ra 3000. You can increase your base response by modifying your amplifier power supply, or build a second smaller power supply to run in conjunction with it and increase the electrolytic capacitors. I will chat little further in my blog on the subject of amplifier modifications